Below is a collection of Mafe Stock ROMs and their download links.

If you need to upgrade/reload the firmware of your Mafe smartphone, fix software issues like hanging, virus infection, slow operation, application errors, boot loop, proper unrooting etc, you can download and flash it to your specific Mafe device.

To download the firmware, click on the appropriate link.

If you need any assistance, kindly use the comment box at the end of this post.

Download Mafe Stock ROMs / Firmwares

Model/Firmware versionDownload Links
Phicomm X130WDownload
Phicomm X130VDownload
Phicomm P660LDownload
Phicomm P660 Phicomm_P660LIN_4.4.4Download
Phicomm P660 Phicomm_P660wEU_4.4.4Download
Phicomm K390WDownload
Phicomm i810TDownload
Phicomm i803WADownload
Phicomm i700WDownload
Phicomm FWS710 FWS710_T07_4.0.4Download
Phicomm FWS710 FWS710_T30_4.0.4Download
Phicomm E550W 4.3.1_1.4T14_0611Download
Phicomm C6051 MT6735M_6.0_1.0T01_1223_MSDownload
Phicomm C230 0000_4.3_1.4T11_1008_NJDownload
Phicomm C230WDownload

How To Flash Firmware To Your Phicomm Smartphone

Step 1: To get started, download the firmware zip file from here and save it on your desktop.

Step 2: Now rename the firmware zip file to ““.

Step 3: Next, enable USB debugging mode in your device by following this path: Settings -> Developer Options -> USB Debugging. If developer option is not visible in your device, enable it by following this path: Settings -> About Phone -> Build Number (tap on it for 5-7 times to enable Developer Options).

Step 4: Now connect your device to the computer using the original USB data cable and transfer the “” file from Step 2 to the SD card of your device.

Step 5: Once the firmware file is successfully transferred to your device, unplug it from your computer.

Step 6: Now switch off your device and boot it into the recovery mode by pressing and holding the Volume Up and Power Buttons simultaneously. Once your device is in the recovery mode, select “wipe cache partition“.

Step 7: Next, select “update / recovery from SD Card” option.

Step 8: Now click on “” in your SD card to launch the firmware flashing process.

Step 9: It will take a minute or two for the flashing process to get completed and once it does, select “reboot system now” option.

If you encounter any issues while following this tutorial, do let me know via comments.

Leave a Reply