Download Infinix Note 3 X601 Clone Stock Firmware

Download Infinix Note 3 X601 Clone Stock Firmware

Got an Infinix Note 3 X601 that you think is a clone? Well, if yes, then you can download the stock firmware for your X601 clone.

The Infinix Note 3 X601 looks exactly like the original outwardly but has some hard to notice differences. Software-wise, the Note 3 clone runs on Android 6.1 Lollipop but shows 6.0 Marshmallow with a theme/UI that looks like XOS.

On the hardware front, the X601 clone uses an MT6580 Mediatek chipset while the original uses an octacore MT6753 CPU. The clone Infinix Note 3 has a 1GB RAM while the original packs either 2GB/3GB of RAM.

The clone even has a fingerprint scanner at the back too.(I couldn’t test that). Other differences are in camera quality, features that come preinstalled on the original and others I can’t mention.

The firmware shared here shouldn’t be flashed to any other device unless the clone of the Infinix X601 Note 3 with the SW specs below.

Download Infinix Note 3 X601 Clone Stock Firmware

 

You Might Also Like To See

Collection Of Original Infinix Stock ROMs/Firmwares

 

Brand : cloud_too
Model : zps_s17
Android Version : 5.1
Device Project : ALPS.L1.MP6.V2_yuntu6580.WEG.L
Device ExtInfo : INFINIX
Build Number : cloud_too/full_zps_s17/zps_s17:5.1/LMY47I/1483097414

 

Infinix Note 3 X601 clone firmware. MT6580__cloud_too__INFINIX__zps_s17__5.1__ALPS.L1.MP6.V2_yuntu6580.WEG.L – Download

Password: http://www.kriztekblog.com

To flash the firmware, use SP Flashtool.

If you have any issue related to this post, kindly drop a comment.

10 Comments

    • Bill
  1. chlakh11787
  2. Chika ubah

Leave a Reply

Ad Blocker Detected

Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker. Thank you.

Refresh