Itel

How To Fix Itel 1503 Display Issue After Flashing

Sharing is caring

Fix Itel 1503 Display Issue itel-1503-display white blank issue flashing fix

 

If you are reading this post, it’s either you have already flashed an Itel 1503 and after the firmware was flashed, you find out that the display is blank, black, white or with stripes.

This mostly happens when the LCD driver in the firmware is incompatible with the phone’s hardware. As time goes on, manufacturers usually reintroduce older smartphones into the market with some very slight changes which might include the device’s display drivers or parts.

Like in MTK phones, flashing a wrong LK.bin will also cause display issues.  It is always recommended that you have a backup of your stock firmware before flashing another.

 

Who knows, you might be the only one with such a phone (::

 

You Might Also Want To See

How To Fix Tecno Y2 Display Issues After Flashing

The display error on the Itel 1503 is as a result of flashing the newer Itel 1503 (2016 version) with the older Itel 1503 (2015 version) firmware.

If you are experiencing this issue, below is a fix that won’t only reverse the display issue but will also upgrade your Itel 1503 to Itel 1508 which looks better.

How To Fix Itel 1503 Display Issue After Flashing

 

 

Note:

This firmware will only work on the new Itel 1503, 2016 build. If you have the 2015 build, use the older firmware. To know your build time, check in About Phone or look at the battery, you should find it there.

Please share and also drop your comments.

Sharing is caring
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

To Top