Infinix Hot 2 X510 MT6572 Copy/Clone Stock ROM
DOWNLOAD FAKE/COPY OR CLONE INFINIX HOT 2 X510 MT6572 STOCK FIRMWARE
Click on the links below to download the stock ROM.
Please, always make a backup of your existing firmware incase you need to revert to the former.
- After flashing, remove and reinsert battery, press volume up and power to boot into recovery, use volume up to scroll and volume down to select.
- Select recovery and perform a factory reset. You can now reboot the device. If all the steps are properly followed, you should get back your Clone Infinix Hot 2 X510 to normalcy.
How To Fix Display Issues After Flashing The Stock ROM To Your Clone Hot 2
If after flashing the stock ROM successfully, but with a blank display, dark display or distorted lines, it’s due to an incompatibility issue with some files in the firmware.
Due to the fact that phones do have multiple variants, which the hot 2 copy is not an exception, there is always some sort of compatibility issue with flash files.
These files are the boot.img, uboot[lk.bin] and preloader.bin. To help fix this at the other side, we have put together the above files from different Infinix Clones so as to get rid of the display issue.
- Download the Infinix Hot 2 Clone Display Fix above and flash the files to your clone Infinix. If after flashing and you still don’t get the display fixed, drop a comment.