Pattern Lock

How To Fix Forgotten Pattern Or Pin Lock On Old Spreadtrum Devices

How To Fix Forgotten Pattern Or Pin Lock On Old Spreadtrum Devices

 

How to remove security lock on sreadtrum Itel Mhorse Samsung Clones BML

Sometimes, getting the exact firmware for your phone is not quite easy. If you cant find a rom for your phone, this tutorial will be of great help if you follow the rules.

Upgrade download and Research download are the two official tools used in flashing files or data to any spreadtrum powered device.

Before flashing firmwares to a spreadtrum device e.g, Itel, MBO, M-Horse etc, you need to first of all install spd drivers on your computer which will enable it connect to your phone successfully.

Before installing the drivers, you need to disable signature verification on your system because these drivers are not signed and your system is by default not going to install it. To disable signature verification on your pc, please check here.

Two of the most popular spreadtrum cpu used in smartphones are the SC6820/SC8810. So many phones out there run on these chips e.g Itel, MBO, Mhorse, Samsung galaxy clones{Spd} etc.
This tool should be used with care and should be used on phones with security lock, hanging, slow response and other minor issues.  Note, this tool will not flash a new os to your phone but will wipe all user data and restore the phone to its factory settings.

 

To know the CPU model used in your SPD smart phones, press the Power and Volume Down button for a while to bring up the test mode. Under test mode you will find your phone’s info. If the button combo doesn’t work, try Power and Volume Up. You can also google it to know its cpu type.

Make sure your CPU model is either SC6820/SC8810 because this utility wont work on any other cpu type unless the ones listed above. 

WHAT YOU NEED

 

  1. Install Spreadtrum USB drivers on your pc 
  2. Spreadtrum 6820/8810 wipe Here
  3. Upgrade download Tool latest version Download Here

PROCEDURE

  • Open the upgrade download folder and run the Research download.exe.
  • Click on the load packet button with a gear icon to load your pac file.
  • Now locate the wipe userdata folder and select either the or SC8810_Wipe_userdata.pac according to your phone’s CPU model.
  • The file will load and be displayed at the top.
  •  Click on the second {Settings} button with two gear icons.
  • On the main page, only tick FDL1, FDL2, userdata and EraseCache.

How To Fix Forgotten Pattern Or Pin Lock On Old Spreadtrum Devices

  • Press OK.
  • Now press the start or play button to begin the wiping process.
  • Switch off the phone, press and hold the volume down button before connecting the USB cable.
  • The process will begin and complete in a short while. You will get a pass message on the screen.

If you get any errors, please let me know via the comments section. 

5 Comments

5 Comments

  1. tabe labaran nkonfeyin

    September 7, 2016 at 12:25 pm

    this is awesome its works pretty best just make sure ur spreadtrum drivers are well installed chris thanks

    View Comment
  2. francis donkor

    October 5, 2016 at 3:30 pm

    THIS ONE WORK FOR BOX OR WHAT ?

    View Comment
  3. Mba Christian Ihechi

    October 5, 2016 at 3:32 pm

    You don't need a box. Just the software "Research Download" and the SC8810/6820 Wipe.pac

    View Comment
  4. francis donkor

    October 5, 2016 at 4:51 pm

    PLS HOW CAN I DOWNLOAD SC8810/6820.PAC PLS

    View Comment
  5. Mba Christian Ihechi

    October 5, 2016 at 7:05 pm

    Download link to the SC6820/8810 Wipe.pac is in the post, number 2 of *What you need*

    Make sure your device is compatible with the file before proceeding to avoid issues.

    View Comment

Leave a Reply

Translate

To Top
%d bloggers like this: